Looking for cable gland manufacturers in Yueqing? The city’s electrical cluster includes suppliers of nylon, brass, stainless-steel, EMC, marine, armoured and explosion-proof cable glands, often alongside conduit, cable ties and panel accessories. This shortlist brings together ten companies with an official product source and a published connection to Yueqing or the surrounding Wenzhou manufacturing area.
A cable gland is a sealing and mechanical interface, not a commodity defined only by thread size. The useful specification includes the cable outer diameter, enclosure wall thickness, thread standard and length, body and seal materials, strain relief, armour or shield bonding, IP requirement and, where relevant, the explosion-protection concept. Use this list to decide which catalogues to open first, then send every supplier the same written schedule. If you are building a wider panel bill of materials, see our terminal block, distribution box and cable tie guides.
How this list was selected: Based on each manufacturer’s official product and location information, reviewed on 22 October 2026. This is a research shortlist, not a quality, price, certification, export or “best” ranking. It does not imply that BottomRace has audited every factory or that every series is suitable for your application. Confirm the legal entity, production site, exact model and current documents before requesting samples or arranging a visit.
Ten Yueqing cable-gland manufacturers to start your enquiry
The published focus below is a route into each catalogue, not a tested performance rating. Start with the cable, enclosure and environment, then compare models, sealing systems and documents on the same technical basis.
| Manufacturer | Published cable-gland focus | Useful first question |
|---|---|---|
| Yueqing Jixiang Connector Co., Ltd. | Nylon, brass, stainless, EMC, marine and explosion-proof glands | Standard, EMC, marine or Ex? |
| Wenzhou Xingwei Electric Co., Ltd. | Nylon, brass, stainless, EMC, marine and explosion-proof glands | Which gland family and thread? |
| Yueqing Qiligang Plastic Co., Ltd. | PG nylon cable glands and sealing accessories | Which PG size and seal material? |
| Yueqing Cejie Electric Co., Ltd. | Metal and plastic waterproof cable clamp joints | Metal or plastic clamp joint? |
| VIOX Electric | BDM flameproof, armoured and angled cable glands | BDM Ex, armoured or angled? |
| Zhejiang Hongxiang Connector Co., Ltd. | Metal, brass, stainless, EMC, marine and Ex glands | Which metal, EMC or Ex model? |
| Zhejiang Houxu Yangsheng Connector Co., Ltd. | Solithos nylon, brass and stainless cable glands | Gland only or complete conduit system? |
| Yueqing ForLink Electrical Co., Ltd. | PG nylon cable glands and cable-management accessories | PG size, cable range and IP rating? |
| YOCL Electric | Nylon, metal, EMC, armoured, marine and Ex glands | Which model table and certificate? |
| Suntree Electric | PG nylon, stainless, Ex and multi-hole cable glands | Which legal entity and factory? |
Manufacturer profiles and questions to ask
1. Yueqing Jixiang Connector Co., Ltd.
Yueqing Jixiang Connector states that it was founded in 2011 and publishes a cable-gland range covering nylon, brass, stainless steel, EMC, marine and explosion-proof families. Its product pages list metric, PG, G and NPT threads, PA66 housings and NBR seals for selected nylon models, and IP68 protection at 10 bar for part of the range. The published address is Building 5-2 and Building 7, BoTong HuiGu, Yueqing Economic Development Zone. The breadth is useful, but the thread, sealing insert, cable range and certificate scope must be checked for the exact catalogue number.
Before requesting a quote: State whether the gland is for a standard cable entry, EMI bonding, marine cable or a hazardous area. Send the thread standard and size, cable outer diameter, enclosure wall thickness, required IP rating, material, colour, seal material, strain-relief requirement and certificate scope. Ask for the exact drawing, thread length, wrench size, tightening torque, accessories and production site.
Official sources: Waterproof cable-gland category · Standard nylon cable gland · Standard brass cable gland · Company / location information.
2. Wenzhou Xingwei Electric Co., Ltd.
Wenzhou Xingwei Electric publishes a cable-gland category that includes nylon, brass, stainless-steel, EMC, marine and explosion-proof families. The company gives its address as No. 27 Jinan Road, Liushi, Yueqing. Some product-page labels vary across the site, so the category and the exact model drawing are more reliable than a title alone. The range can be used as a first route for buyers comparing several gland materials and thread systems, provided every quoted variant is identified by model number and specification.
Before requesting a quote: Give the supplier the cable construction, outer diameter, conductor and shield type, enclosure material, thread, wall thickness and environment. Ask which parts are moulded, machined, plated or assembled at the named site. For EMC or explosion-proof versions, request the exact bonding or Ex construction and the model-level certificate rather than relying on the category name.
Official sources: Cable-gland category · Company / location information.
3. Yueqing Qiligang Plastic Co., Ltd.
Yueqing Qiligang Plastic states that it was established in 1996 and publishes PG nylon cable glands from its Huaxi Industrial Zone base in Huanghua Town, Yueqing. The product information identifies nylon 66 bodies and nitrile rubber seals for selected glands and publishes an IP67 protection claim. The company’s wider product range covers cable ties and wiring accessories, which can make it relevant to buyers consolidating small cable-management parts. Buyers should still separate the gland specification from the broader accessory catalogue and verify the exact thread, seal and cable range.
Before requesting a quote: Confirm the PG size, thread length, cable range, body and seal materials, colour, locking-nut requirement, temperature range and IP test basis. Ask for the dimensional drawing and a sample that is marked with the exact model. If the gland will be used outdoors, add UV exposure, chemical contact and installation torque to the written requirement.
Official sources: Cable-gland range · Company / location information.
4. Yueqing Cejie Electric Co., Ltd.
Yueqing Cejie Electric publishes a cable-gland category described as metal and plastic waterproof clamp joints. The company also publishes terminal connectors, busbars, insulators and DIN-rail accessories, and its contact page gives No. 270 Wei Twenty Road, Yueqing Economic Development Zone. This combination is useful when a panel project needs cable entries alongside connection and busbar components, but the gland quotation should remain a separate technical schedule. The site’s founding-year statements vary, so this shortlist does not use a founding date.
Before requesting a quote: Specify metal or plastic construction, metric or PG thread, cable diameter, enclosure wall thickness, IP requirement and whether the joint must provide strain relief. Ask for the body, insert and seal materials, plating or surface treatment, thread dimensions, locking nut and gasket. Confirm whether the quoted item is a complete gland or only one component of a clamp-joint assembly.
Official sources: Cable Grand category · Metal waterproof clamp joint · Company / location information.
5. VIOX Electric
VIOX Electric publishes a cable-gland category that includes BDM flameproof and armoured families plus a 90-degree adaptor for restricted cable-entry space. The contact page gives the First Building, East Innovation Zone, Wengyang Town, Yueqing. The published range is relevant to buyers comparing hazardous-area construction, armour clamping and angled entries rather than only standard nylon glands. A flameproof name on a category page is not enough on its own: the exact model, marking, certificate scope and installation conditions must match the enclosure and application.
Before requesting a quote: Send the enclosure certification, cable type and diameter, armour type, thread, wall thickness, entry angle and required protection concept. Ask for the exact BDM model drawing, material and plating, seal and armour-bonding arrangement, tightening torque, accessory list and certificate that names the model. Confirm the production site and whether the installer must use a specific sealing washer or compound.
Official sources: VIOX cable-gland range · Company / location information.
6. Zhejiang Hongxiang Connector Co., Ltd.
Zhejiang Hongxiang Connector states that it was founded in 2006 and publishes metal, brass, stainless-steel, EMC, marine, explosion-proof and nylon cable glands. Its published address is Daheyan Village, Xiangya Town, Yueqing. The separate metal and EMC pages make the range easier to screen by construction, but buyers should not assume that every material or protection claim applies to every model. Start with the cable and enclosure requirement, then ask for the matching model and document package.
Before requesting a quote: Provide the cable diameter, armour and shield construction, thread, wall thickness, material, IP requirement and any marine or hazardous-area condition. Ask whether the EMC contact is through the armour, braid or a separate spring, and request the exact gland drawing and model-level certificate. Confirm the seal material, plating, torque and the accessories needed for a complete installation.
Official sources: Metal cable-gland range · EMC cable-gland range · Company / location information.
7. Zhejiang Houxu Yangsheng Connector Co., Ltd.
Zhejiang Houxu Yangsheng Connector, which presents the Solithos brand, states that it was founded in 2006 and publishes nylon, brass and stainless-steel cable glands together with conduit products. The published address is Building 5, Pannan Small and Micro-sized Enterprise Park, Pannan Village, Panshi Town, Yueqing. The range is useful for buyers comparing gland materials and a matching conduit or cable-management system. Because the brand and legal company names differ, use both names in the quotation and verify the contracting entity.
Before requesting a quote: Ask for the quotation under both the Solithos brand and the legal company name. Specify the thread, cable range, body and seal materials, IP requirement, colour and whether a locknut, gasket or shroud is included. If conduit is part of the project, send the conduit size and thread so the complete system can be checked together rather than selecting each part independently.
Official sources: Nylon cable glands · Brass cable glands · Stainless-steel cable glands · Company / location information.
8. Yueqing ForLink Electrical Co., Ltd.
Yueqing ForLink Electrical publishes PG nylon cable glands within a wider cable-management range. Its published office address is No. 13 Shangxi Road, Shangmiao Village, ChengNan Street, Yueqing. The company is a useful starting point for buyers that need glands together with ties, markers or other cable accessories, but the address is described as an office. Ask where the quoted glands are produced and which legal entity will issue the commercial documents.
Before requesting a quote: Confirm the PG size, cable range, thread length, nylon grade, seal material, colour, IP rating and whether a locknut or sealing washer is included. Ask for the exact model drawing, packing quantity and production address. If the order combines glands with other cable accessories, list each item separately so that a lower total price does not hide a substitution or missing accessory.
Official sources: PG nylon cable glands · Company / location information.
9. YOCL Electric
YOCL Electric states that it was independently established in 2017 with roots in WEIOU from 2010. Its cable-gland category covers nylon, metal, EMC, armoured, marine and explosion-proof families, with model tables for selected products. The published address is Huadong Village, Liushi Town, Yueqing. Detailed model tables are useful for an initial comparison, but the buyer should still request the current drawing, thread dimensions, seal material and certificate scope for the exact catalogue number.
Before requesting a quote: Identify the cable type, outer diameter, shield or armour, enclosure thread and environmental requirement. Ask for the exact model table, drawing, material and plating, sealing insert, IP test basis, tightening torque and accessory list. For an EMC, marine or explosion-proof variant, ask for the document that names the model and confirm that the offered marking matches the destination installation.
Official sources: Cable-gland manufacturer range · One-piece nylon metric gland · Metric waterproof brass gland · Company / location information.
10. Suntree Electric
Suntree Electric publishes a PG cable-gland category covering nylon waterproof glands, stainless-steel multi-hole glands and an explosion-proof family. Its company profile describes more than 16 years of experience in the electrical industry, and its contact page gives No. 3 Siqian Road, Xinguang Industrial Zone, Liushi Town, Yueqing. The same contact page separately identifies Wenzhou Xinchi International Trade Co., Ltd. as an exporter. That makes entity and production-site verification especially important before placing an order.
Before requesting a quote: Ask Suntree to name the legal entity that will quote, invoice and warrant the order, and the factory that will produce the exact gland. Specify the thread, cable range, number of cable entries, body and seal materials, IP requirement and whether the application needs an explosion-proof construction. Request the model drawing, certificate scope and confirmation that the exporter and manufacturer roles are clearly stated in the commercial documents.
Official sources: PG cable-gland category · Suntree company profile · Company / location information.
Compare cable glands on the same cable and enclosure
A cable-gland quotation can look complete while leaving out the parts that determine whether the entry will seal and hold. Put the cable, enclosure, environment and installation method in one written brief. Ask each supplier to quote the exact gland, locknut, sealing washer, shroud or adaptor as separate lines and to mark every deviation rather than substituting a similar-looking product.
| Include in your enquiry | Ask the supplier to confirm |
|---|---|
| Thread and mounting | Metric, PG, G or NPT thread; thread size and length; enclosure wall thickness; hole tolerance; locknut, gasket and sealing-washer requirement. |
| Cable range | Minimum and maximum cable outer diameter, cable construction, conductor and sheath materials, number of cables for multi-hole glands and whether the cable is armoured or braided. |
| Body and insert | Nylon grade, brass or stainless-steel grade, plating, insert material, seal material, colour, UV exposure and operating-temperature range. |
| Protection | Required IP rating and test basis, water pressure or immersion condition, dust exposure, chemical contact and whether the claim applies to the complete installed gland. |
| Mechanical duty | Strain relief, pull-out resistance, vibration, bending, cable movement and the recommended tightening torque for the body and sealing nut. |
| Armour and EMC | Armour type and diameter, braid or shield construction, earth or EMC bonding method, contact resistance requirement and the exact accessory needed for bonding. |
| Hazardous area | Ex protection concept, zone and gas or dust group, enclosure certificate, gland model and marking, sealing arrangement and the installer instructions that apply. |
| Complete assembly | Gland, locknut, washer, earth tag, shroud, adaptor, reducer, sealing compound or accessory; whether the quotation is per piece or per complete set. |
| Documents and source | Current drawing, model-level certificate or test report, material declaration, installation instruction, production site, legal entity, MOQ, lead time and change-control terms. |
Do not select a gland by thread size alone. A PG16 gland from one supplier may accept a different cable range from another, and an EMC or explosion-proof version can use a different insert, contact or body length. The enclosure hole, wall thickness and gasket also affect the installed seal. For a multi-hole gland, confirm the number and diameter of the cable entries and the orientation that will be used on site.
For outdoor or marine equipment, add UV, salt-spray and chemical exposure to the schedule. For a panel with many cable entries, ask for a sample installed on the same enclosure material and wall thickness. For armoured cable, confirm that the armour can be clamped and bonded without cutting strands, and ask whether an earth tag or separate bonding accessory is required. A certificate should identify the exact model, construction and production site, not only the company name.
Turn the shortlist into a productive cable-gland factory visit
Arrange a visit after the supplier has answered the technical schedule and identified the production site for the exact model. A company may mould nylon parts, machine brass bodies, plate metal components and assemble seals in different departments or at different locations. The visit should follow the actual process behind your product.
- Bring the cable and enclosure details: include the cable diameter, construction, armour or shield, thread, wall thickness, IP requirement, quantity and destination market.
- Agree the visit checklist: identify incoming material inspection, moulding or machining, thread cutting, plating, seal assembly, torque checks, marking and packing stages relevant to the quoted family.
- Compare the sample with the quotation: check the model label, thread, cable range, insert, seal, body length, plating, marking and supplied accessories against the approved drawing.
- Review traceability: ask how polymer, metal, seal and plating batches are linked to assembly lots, test records, carton labels and change notifications.
- Confirm what the visit proves: a factory visit provides observations and answers, not a type test, certification review or guarantee of future production quality. Arrange product testing and market-access checks separately.
If you are travelling to Yueqing, BottomRace coordinates electrical sourcing and purchasing in Yueqing. Pro: $0 separate service fee; procurement service costs are included in the product quotation. Basic: 5% of product value, with a minimum service fee of $100, for your existing Yueqing suppliers. Compare our Pro and Basic services. For on-site meetings, see our factory visit services. The quotation confirms the scope, inspections, payment terms and any additional costs.
Questions buyers often ask
What is the difference between a cable gland and a cable connector?
A cable gland usually seals and mechanically secures a cable as it enters an enclosure, while a connector may terminate conductors or provide a pluggable joint. Suppliers sometimes use the terms loosely. Ask for the drawing, thread, cable range, sealing method and installation function rather than choosing by the product name.
How do I choose between nylon, brass and stainless-steel glands?
Start with the enclosure material, cable type, environment, mechanical load and required protection. Nylon can suit general industrial and outdoor entries when the correct UV and seal materials are specified; brass offers strength and conductivity for metal constructions; stainless steel may be relevant to marine or corrosive environments. Confirm the actual grade, plating and compatibility rather than relying on a broad material description.
When is an EMC cable gland needed?
An EMC gland is used when the cable shield or armour must be bonded to the enclosure to control electromagnetic interference. The required contact method depends on the shield, armour, enclosure and grounding plan. Ask how the gland contacts the braid or armour, what contact resistance is expected and whether an earth tag or separate bonding conductor is needed.
Can I use an explosion-proof gland with any certified enclosure?
No. The enclosure certificate, gland certificate, protection concept, thread, cable and installation instructions must be compatible. The gland marking and certificate scope need to match the application. Ask a qualified compliance specialist to review the complete assembly; a product title or company certificate does not establish compatibility by itself.
What should be included in a cable-gland sample request?
Send the cable sample or its exact outer diameter and construction, the enclosure material and wall thickness, thread standard and length, required IP rating, indoor or outdoor environment and any EMC, marine or hazardous-area requirement. Ask for the matching locknut, washer and seal, and request that the sample and quotation carry the same model number.
Does an IP68 claim cover every cable and installation?
No. The protection depends on the cable diameter, surface condition, sealing insert, tightening torque, enclosure hole and installation method. Ask for the test condition and the cable range covered by the claim. If the application involves pressure, immersion, chemicals or repeated cable movement, include those conditions in the technical review.
Are these companies ranked by quality, price or export volume?
No. This is a research shortlist based on published product and location information. It is not a quality, price, certification or export ranking. Send every supplier the same technical schedule, compare deviations and documents, and verify the legal entity and production site before ordering.
Can BottomRace help arrange a Yueqing cable-gland factory visit?
Yes. BottomRace provides electrical procurement support, factory screening, accompanied visits, English-Chinese interpretation and local coordination in Yueqing. We confirm the scope, availability and fees before you book. Email your cable-gland schedule and preferred dates to contact@bottomrace.com.
Need help narrowing your cable-gland shortlist?
Email the cable type and diameter, thread, enclosure wall thickness, material, IP requirement, quantity and destination market. We can discuss supplier screening and local support in Yueqing.