Looking for DIN rail manufacturers in Yueqing? Gaoke, Sodd, VIOX, YOCL, Cejie, CHAER, Haitan, SOCOME, Shilong and KASEEY publish metal mounting-rail products and a local address. Their ranges include steel, aluminium and selected stainless-steel rails, with 35 mm top-hat, G-profile and mini formats. Start with the profile and mounted-device requirements, then compare the manufacturers that publish the relevant construction.
This guide focuses on the metal rail inside the cabinet. The specification should identify width, height, thickness, material, finish, slot pattern, cut length and support arrangement. For the components fitted onto the rail, see our terminal-block manufacturer guide; for the surrounding enclosure, see our distribution-box guide.
How this list was selected: Official product and location information reviewed on 22 October 2026. The numbers identify a research shortlist, not a quality, price, certification or export ranking. A published product range and local address do not establish where every model is manufactured or imply that BottomRace has audited the factory. Confirm the legal entity, production site, exact rail drawing and current documents before ordering.
Ten Yueqing DIN-rail manufacturers to compare
The published focus below helps you choose a starting catalogue. Send every shortlisted supplier the same rail section and cutting schedule so that quotations cover the same part.
| Manufacturer | Published DIN-rail focus | Useful first question |
|---|---|---|
| Yueqing GaoKe Environmental Electric Co., Ltd. | Steel and aluminium rails, fixing accessories and cutters | Which rail section and matching accessories? |
| Sodd Electrical | 35 mm top-hat, G32 and mini steel or aluminium rails | Slotted or solid, standard length or cut to size? |
| VIOX Electric | Steel, stainless-steel, aluminium and G-profile rails | Which material and profile fit the installed devices? |
| YOCL Electric | TS35 steel and aluminium, G32 and 15 mm mini rails | Which profile, slots and section thickness? |
| Yueqing Cejie Electric Co., Ltd. | Steel and aluminium DIN rails with panel accessories | Which rail and panel-fixing arrangement? |
| CHAER Technology | TS35, G32, aluminium rails, fixing parts and cutters | Which mounting geometry and cut-end requirement? |
| Haitan | Slotted galvanised and stainless-steel DIN rails | Which metal grade and environmental finish? |
| SOCOME | 35 mm, galvanised-steel and slotted aluminium rails | Which rail reference within the wiring package? |
| Zhejiang Shilong Electric Technology Co., Ltd. | 35 mm slotted steel and aluminium mounting rails | Which slot pattern and aluminium surface treatment? |
| KASEEY Electric | DS steel and DA aluminium 35 mm DIN rails | Which DS or DA model and hole option? |
Manufacturer profiles and questions to ask
1. Yueqing GaoKe Environmental Electric Co., Ltd.
Gaoke publishes dedicated steel and aluminium DIN-rail categories, together with rail accessories and cutters. Its catalogue includes HGK-01 steel rail, GK120 aluminium rail and several fastening and support references. The published contact address is 801-811 Lehu Road, Shahu Industrial Zone, Liushi, Wenzhou. This is a useful starting point for buyers who need rails alongside fixings or cutting equipment. Order the rail by its section drawing and article number, then confirm that the selected cutter and accessories suit that particular profile.
Before requesting a quote: Send the required profile, material, thickness, cut length and slot layout. Request the drawing, finish specification, dimensional tolerances and packing method. If a cutter or raised support is included, identify the matching model and verify the finished rail height within the cabinet.
Official website: Yueqing GaoKe Environmental Electric Co., Ltd. DIN-rail range.
2. Sodd Electrical
Sodd's company information identifies Zhejiang Suodi Electric Co., Ltd. and includes DIN rails among its manufactured electrical connection products. Its rail information covers 35 mm top-hat, 32 mm G-profile and 15 mm mini formats, with slotted and unslotted steel and selected aluminium constructions. Published supply options include one- and two-metre lengths and custom cutting. The contact address is Building 6, No. 29 Binhai South 3rd Road, Wei 17 Road, Yueqing Economic Development Zone.
Before requesting a quote: Specify the section, material, finish, thickness and required lengths. Ask for the slot dimensions and pitch, end-to-first-slot distance, cutting tolerance and edge treatment. Confirm the manufacturing entity named in the quotation and the packing arrangement for long or mixed-length rails.
Official website: Sodd Electrical DIN-rail range.
3. VIOX Electric
VIOX publishes steel, stainless-steel and aluminium mounting rails. The catalogue includes a TH35-15 steel top-hat rail, a TH35-7.5 stainless-steel example, aluminium TH35 variants and G32-15 steel and G32-15L aluminium profiles. Its contact address is the First Building, East Innovation Zone, Wengyang Town, Yueqing. The range allows buyers to compare different profile and material options, provided each quotation identifies the exact rail and the components that will clip onto it.
Before requesting a quote: Provide the mounted-device references, profile drawing, material grade, thickness, hole pattern and cut length. Ask for the specified surface treatment, dimensional inspection criteria and load or support information relevant to the assembly. Request any missing model data before approving the sample.
Official website: VIOX Electric DIN-rail range.
4. YOCL Electric
YOCL publishes 35 mm top-hat, 32 mm G-profile and 15 mm mini DIN rails in steel and aluminium families. Its range includes 35 x 7.5 mm slotted and ribbed steel, 35 x 15 mm slotted steel, aluminium top-hat rails and steel or aluminium G-profile examples. The contact address is Huadong Village, Liushi Town, Yueqing. The catalogue separates the mounting section, slot configuration and material, making those details useful starting points for a written rail schedule.
Before requesting a quote: List the required width and height, material, thickness, slots, length and quantity for each reference. Ask for the current drawing, compatible device and end-clamp information, finish and packing. Keep a ribbed or reinforced section separate from a plain rail in the quotation.
Official website: YOCL Electric DIN-rail range.
5. Yueqing Cejie Electric Co., Ltd.
Cejie publishes separate steel and aluminium DIN-rail families alongside terminal clamps, connection components and distribution hardware. Its published address is No. 270 Wei Twenty Road, Yueqing Economic Development Zone. The range is relevant when a panel order combines mounting rails with terminal or busbar accessories. Ask for the rail section independently of the component catalogue: an accessory described as rail-mounted still needs to match the chosen rail's dimensions and the cabinet's fastening arrangement.
Before requesting a quote: Send the device layout, rail section, available cabinet depth and fixing-hole positions. Request the exact steel or aluminium model, material and finish, thickness, cutting details and compatible clamps. State whether the price covers the rail alone or a kit with supports and fixings.
Official website: Yueqing Cejie Electric Co., Ltd. DIN-rail range.
6. CHAER Technology
CHAER Technology's site identifies KAER Technology Co., Ltd. and publishes steel rails, aluminium rails, fixing accessories and cutters. Its range includes TS35 steel models, G32/15 steel rail, aluminium TS35 and TS32 families and a dual-purpose aluminium mounting rail. The address is No. 230 Wei 20 Road, Yueqing Economic Development Zone. Some published rails use different section heights, so choose the exact drawing before comparing nominal width or requesting a replacement.
Before requesting a quote: Identify the catalogue reference and supply the mating device details. Confirm the section height, metal thickness, slot geometry and cutting length. Ask how the chosen cutter treats the rail ends, and specify the required burr control, end condition and protective packing.
Official website: CHAER Technology DIN-rail range.
7. Haitan
China Haitan Electromechanical Technology Co., Ltd. publishes slotted DIN rails in galvanised and stainless-steel materials. The product page identifies a 35 x 7.5 mm top-hat format and customisable lengths. Its address is No. 20 Lingyun Road, Dongfeng Industrial Zone, Liushi Town, Yueqing. This makes Haitan a relevant candidate when the enquiry includes a stainless-steel requirement or rail for an enclosure-accessory package. Confirm the metal grade and finish for the selected part rather than treating all silver-coloured rails as equivalent.
Before requesting a quote: Specify the enclosure environment, exact steel or stainless grade, section, thickness and length. Request the surface treatment specification, slot drawing and corrosion-test conditions where required. Confirm the inspection method and how cut ends are handled before packing.
Official website: Haitan DIN-rail range.
8. SOCOME
SOCOME publishes a DIN-rail and wire-duct category that includes 35 mm mounting rail, galvanised-steel rail and slotted aluminium rail. Its published address is No. 307 Wei 19 Road, Yueqing Economic Development Zone. The broader company catalogue covers power fittings and wiring accessories, which can be useful for buyers consolidating a cabinet bill of materials. Keep the rail as a fully specified line item even when it is quoted alongside wire duct, connectors or other accessories.
Before requesting a quote: Ask for the exact article number, cross-section, metal grade, thickness, coating and slot layout. Confirm the supplying production site and the inspection documents for that rail. For a mixed order, specify quantities in metres and pieces and identify the packing and labelling for each length.
Official website: SOCOME DIN-rail range.
9. Zhejiang Shilong Electric Technology Co., Ltd.
Shilong, presented under the ZJSLAC brand, publishes 35 mm slotted mounting rails with steel and aluminium examples. Its catalogue includes an oxidation-treated aluminium rail and product references described with a 1 mm thickness. The address is No. 766 Chengxin Road, Shahu Industrial Zone, Yueqing. These published examples are useful for an initial comparison, but the supplier should confirm the exact section height, thickness and finish in the drawing attached to your quotation.
Before requesting a quote: State the rail section, required base-metal thickness and finish, slot size and pitch, and cut lengths. Ask for dimensional tolerances and a representative sample. If an anodised or coated rail is specified, confirm its suitability for the complete mounting and bonding design.
Official website: Zhejiang Shilong Electric Technology Co., Ltd. DIN-rail range.
10. KASEEY Electric
KASEEY publishes six DS steel and three DA aluminium DIN-rail references, all with a 35 mm width and standard one- or two-metre lengths. Its model table distinguishes steel section heights of 6.5, 7.5 and 15 mm, while the aluminium references use a 7.5 mm height. Published hole options include 4.2 x 12, 6.2 x 15 and 5 x 25 mm. The contact address is No. 77-8, 19th Wei Road, Yueqing Economic Development Zone.
Before requesting a quote: Name the DS or DA order model, material, thickness, section height, hole option and length. Confirm the complete profile against the mounted-device drawing, particularly when comparing 6.5 and 7.5 mm sections. Request the current drawing, finish specification, sample and packing details.
Official website: KASEEY Electric DIN-rail range.
Specify the complete rail before comparing prices
A request for a generic “35 mm DIN rail” leaves important details open. Two rails can share the same nominal width while differing in height, thickness, mounting slots or edge geometry. Build the enquiry around the rail drawing, mounted components and cabinet support positions.
| Include in your enquiry | Ask the supplier to confirm |
|---|---|
| Profile and device fit | Full cross-section drawing, nominal width and height, flange geometry and dimensional tolerances; compatibility with the exact device foot and end clamp. |
| Material and thickness | Steel, aluminium or stainless-steel grade; base-metal thickness and tolerance; whether the quoted dimension includes the surface treatment. |
| Surface treatment | Coating or anodising specification, inspection method and corrosion-test conditions where required. Appearance alone does not identify the metal or finish. |
| Slots and holes | Slotted or solid section, hole width and length, pitch, end-to-first-hole distance and alignment with the cabinet’s fixing points. |
| Cutting schedule | Length and quantity for each piece, length tolerance, squareness, burr limits and the required treatment of exposed cut ends. |
| Mechanical support | Mounted-device mass and arrangement, support spacing, overhang, vibration or transport conditions, and any declared load data for the exact rail section. |
| Bonding and earth contacts | Rail, protective-earth terminal and fastening combination required by the panel design; relevant component instructions and evidence for the complete connection path. |
| Accessories | End stops, raised supports, brackets and fixings; matching part numbers, installed height and whether each item is included or quoted separately. |
| Inspection and documents | Current drawing, material and finish records, dimensional inspection, straightness and twist criteria, applicable standard and model-specific evidence. |
| Commercial and packing | Price per metre or per piece, actual supplied lengths, MOQ, cutting charges, carton quantity, protection against bending and moisture, lead time and change control. |
Separate mounting fit from electrical function. IEC 60715:2017 addresses dimensional and functional requirements for compatible mounting on specified rail types. Its published scope places the rail’s protective-earthing function under the relevant product standard. A rail-width label therefore does not establish the bonding performance of a complete terminal-and-rail assembly.
Ask for samples that include the actual device, end clamp and rail section in your purchasing schedule. Check clipping and release, seating at the fixing points, clearances around screw heads, straightness and the condition of punched and cut edges. Agree the measurable acceptance criteria before the supplier makes the production sample.
For cut-to-length orders, include the required first-hole position as well as overall length. A piece can meet its length requirement and still miss the cabinet’s mounting holes. Confirm whether the supplier cuts before or after finishing, and agree how the completed rails will be packed to prevent bent flanges, twisting or coating damage in transit.
Plan a DIN-rail factory visit around the production process
Confirm which operations are performed at the proposed Yueqing factory. Steel profile forming, aluminium extrusion, punching, cutting and surface treatment can involve different facilities. Follow the process that produces your selected rail.
- Bring the section and cutting schedule: include the material, finish, thickness, hole pattern, piece lengths, quantities and mounted-device references.
- Review material control: ask how metal grades and thicknesses are checked and traced to the finished rail batch.
- Check forming and punching: review the profile gauges, slot positioning, straightness and twist checks, cutting method and edge inspection relevant to the order.
- Identify outside processes: record who performs plating, anodising or other finishing, and how the factory checks returned material and coating records.
- Agree sample and packing checks: compare the finished rail with the approved drawing and mounted components, then review labelling, corrosion protection and transit support.
BottomRace coordinates electrical sourcing and purchasing in Yueqing. Pro: $0 separate service fee; procurement service costs are included in the product quotation. Basic: 5% of product value, with a minimum service fee of $100, for your existing Yueqing suppliers. Compare our Pro and Basic services. For on-site meetings, see our factory visit services. The quotation confirms the scope, inspections, payment terms and any additional costs.
Questions DIN-rail buyers often ask
Are TS35, TH35 and NS35 rails always interchangeable?
These labels often appear on 35 mm top-hat products, but the full profile drawing controls selection. Check height, thickness, flange dimensions, tolerances and the mounted-device instruction. A 35 mm width alone does not confirm fit, especially where the catalogue includes several section heights.
Should I choose 35 x 7.5 mm or 35 x 15 mm rail?
Choose the section that matches the device and cabinet design. Review the actual load, material, thickness, fastening spacing and required clearance. A deeper rail changes the installed component height and mechanical section; request the manufacturer’s data rather than assuming a universal load rating from the depth alone.
What is the practical difference between slotted and solid rail?
Slots provide fixing positions along the rail, while a solid rail needs the holes required by the mounting design. Compare the exact slot layout, screw heads, support positions and available section. For pre-cut pieces, confirm where the first slot falls relative to the cut end.
Can I replace steel DIN rail with aluminium?
Review the substitution against profile fit, mechanical support, finish, environment and any protective-earth function in the assembly. Equal nominal width and thickness do not prove equivalent behaviour. Obtain approval for the selected material and rail reference before substituting it in repeat production.
What should I request with the production sample?
Request the exact rail reference, a controlled drawing, material and finish specification, cutting and hole-position requirements, batch identification and the agreed inspection criteria. Include the end clamp or mounted component where fit is part of acceptance. For a transport-sensitive order, review a packed sample too.
Can BottomRace help arrange a DIN-rail factory visit?
Yes. Email your profile drawing, material and finish, thickness, cutting schedule, quantity and preferred dates to contact@bottomrace.com. We can agree the local coordination, interpretation and observation scope before arranging the visit.
Build your DIN-rail shortlist with local support
Send your rail section, cutting schedule, mounted-device details and quantities. We can discuss supplier enquiries and factory visits in Yueqing.